ReadyPlanet.com
dot
dot
Hot sale Products
dot
Filtration apparatus
dot
Oil free Vacuum Pump, Filtration Apparatus and SPE Manifold
dot
bulletSPE Vacuum manifold
bulletSciChro Vacuum Pump
bulletLABVAK Vacuum pump
bulletVacuum Glass Filtration Apparatus
bulletStorage Bottle filtration set
bulletMembrane Filters
dot
Representative Products
dot
dot
dot
bulletValve, Fitting and tubing
bulletSyringe and needle
bulletHPLC Columns
bulletDiluter and Dispenser
bulletPipettes and Pipetters
dot
Sample Concentrator Nitrogen Blow Down
dot
bulletSample Concentrator Nitrogen Blow Down
dot
Nitrogen Generator and Air Compressor
dot




Sample concentrator

Sample Concentrator

 

 

Download Brochure_.pdf

 

 

MD200 series Sample Concentrator
Nitrogen Blow Down

 

is mainly used for the concentration and preparation of large batches of samples, such as sample preparation in drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry analysis.

 

Working principle: By blowing nitrogen gas into the surface of the heated sample, the solvent in the sample is quickly evaporated and separated, so as to achieve the purpose of anaerobic concentration of the sample and keep the sample more pure.

 

Using a sample concentration instead of a common rotary evaporator for concentration can condense dozens of samples at the same time, greatly shortening the sample preparation time, and has the characteristics of time saving, easy operation and speed.

   

Features:

  • High precision and wide range of temperature control
  • Blowing a large number of samples at one time
  • Blowing each sample independently
  • Amount of airflow can be adjusted
  • Easy operation; safe and reliable to use
  • Low nitrogen consumption of 330 ml/min/sample
  • The heater enables the sample to be quickly and efficiently heated to the evaporation temperature, and at the same time, the gas is blown from the gas chamber to the surface of the solution through the gas needle, which promotes rapid evaporation of the solution and concentration of the sample
  • The position of the gas needle in the gas chamber can be changed to make it suitable for different test tubes. The standard gas needle length is 150 mm
  • The height of the air cavity could be adjusted, this product has a unique feature: the liquid level position of the concentrated sample can be observed at any time when the sample is concentrated
  • When concentrating toxic solvents, the entire system can be placed in a fume hood
  • Automatic fault detection and alarm function
  • Standard with air chamber and special adjustable stand
  • Built-in over temperature protection device
  • Real time temperature display, time decrement display

 

 

Specifications

 

Model

 

MD200-1

MD200-1A

MD200-2

Temperature Control Range

RT+5°C~150°C

RT+5°C~150°C

RT+5°C~150°C

Timer

1min ~ 99h59min

1min ~ 99h59min

1min ~ 99h59min

Display

LED

LED

LED

Temp. Control Accuracy @40~100°C

± 0.C

± 0.C

± 0.C

Temp. Control Accuracy @100~150°C

± 1°C

± 1°C

± 1°C

Display Accuracy

0.C

0.C

0.C

Heating Time(40~150°C)

30min

30min

30min

Standard Blocks

1

1

2

Nitrogen Consumption

0 - 10L/min

0 - 10L/min

0 - 10L/min

Dimension(mm)

280 x 240 x 110

280 x 240 x 110

280 x 240 x 110

Needle Length

150mm

80mm

150mm

 

 

Ordering Informations

 

Part No.

Descriptions

AS-06050-00

MD200-1 AC220V, 50/60 Hz, 200W

AS-06060-00

MD200-1A AC220V, 50/60 Hz, 200W

AS-06070-00

MD200-2 AC220V, 50/60 Hz, 400W

AS-06051-01

150mm Needles

AS-06061-01

80mm Needles

AS-06051-02

Flow Control Valve

 

 Block for MD200 Series Sample Concentrator

 

Part No.

Type

Description

Dimensions ( mm )

AS-01081-01

BK01

49 x Φ6mm

96 x 96 x 49

AS-01081-02

BK02

49 x Φ7mm

96 x 96 x 49

AS-01081-03

BK03

25 x Φ10mm

96 x 96 x 49

AS-01081-04

BK04

25 x Φ12mm

96 x 96 x 49

AS-01081-05

BK05

25 x Φ13mm

96 x 96 x 49

AS-01081-06

BK06

12 x Φ15mm

96 x 96 x 49

AS-01081-07

BK07

16 x Φ15mm

96 x 96 x 49

AS-01081-08

BK08

12 x Φ16mm

96 x 96 x 49

AS-01081-09

BK09

16 x Φ16mm

96 x 96 x 49

AS-01081-10

BK10

12 x Φ19mm

96 x 96 x 49

AS-01081-11

BK11

16 x Φ19mm

96 x 96 x 49

AS-01081-12

BK12

9 x Φ20mm

96 x 96 x 49

AS-01081-13

BK13

9 x Φ26mm

96 x 96 x 49

AS-01081-14

BK14

4 x Φ28mm

96 x 96 x 49

AS-01081-15

BK15

4 x Φ40mm

96 x 96 x 49

AS-01081-16

BK16

49 x 0.5ml tubes

96 x 96 x 49

AS-01081-17

BK17

25 x 1.5ml tubes

96 x 96 x 49

AS-01081-18

BK18

25 x 2.0ml tubes

96 x 96 x 49

AS-01091-01

BK19

96 x 0.2ml tubes

78 x 114 x 26

AS-01091-02

BK20

96 x 0.2ml microplate

81 x 123 x 19


 

REMARK: MD200-1A can only hold BK19 or BK20 !

 

 

 

 

     
     

 



1
[Go to top]



Copyright © 2010 All Rights Reserved.

C.E. Instruments (Thailand) Co., Ltd.

68/876 Moo 8, Rattanathibet Rd, Bangkrasor,
Muang – nonthaburi, Nonthaburi 11000, Thailand
Tel : 0-29658971-3   Fax : 0-29658974

Email : sales@cethailand.com Web site : www.cethailand.com