dot
Consumable for Chromatography
dot
dot
dot
bulletVICI Valco Cheminert
bulletVICI Jour
bulletSyringe and needle
bulletHPLC Columns
bulletDiluter and Dispenser
bulletPipettes and Pipetters
dot
Filtration Solution Products
dot
Filtration apparatus
bulletSPE Vacuum manifold
bulletSciChro Vacuum Pump
bulletLABVAK Vacuum pump
bulletVacuum Glass Filtration Apparatus
bulletStorage Bottle filtration set
bulletMembrane Filters
dot
Sample Preparation Products
dot
dot
Sample Concentrator Nitrogen Blow Down
dot
bulletSample Concentrator Nitrogen Blow Down




M18G High Speed Centifuge

 

                                                                 M18G Low Speed Centrifuge
200 - 18000 rpm

 

Download Brochure_.pdf

 

Features: 

1.    Smaller footprint, saving valuable laboratory space;

2.    Rotor automatic identification and imbalance detection to ensure centrifugation safety;

3.    Separate flash momentary centrifugal button, that is, press and turn;

4.    Electric suction double door lock design, the door cover can be quickly closed with a single touch, quieter and safer;

5.    The centrifugal door cover is supported by double air rods to make the opening and closing of the door smoother and the opening height lower;

6.    A variety of shutdown music ringtones, the duration of the music and the prompt tone can be adjusted to make the experiment more comfortable;

7.    The display interface supports switching between Chinese and English menus;

8.    Extensive selection of rotors and adapters, suitable for all commonly used centrifuge tubes;

9.    10 custom stored programs/5 shortcut stored programs on the panel call, more convenient and fast;

10.  The centrifuge cavity is coated with Teflon to resist the centrifugation of highly corrosive samples;

11.  The sealing ring of the door cover is molded with imported gas-phase glue, which meets the long-life use and has a better sealing effect;

12.  5-inch IPS full-viewing angle 16 million chroma true-color LCD display with adjustable brightness, which fully meets health demands;

13.  External USB2.0 interface is convenient for system upgrade and experimental data download;

14.  Built-in startup timing and stable timing can effectively calculate the centrifugal efficiency;


Specification

Model

M18G

input power

AC 220V / 5060Hz

input power

500 W

Maximum capacity

400 ml (100ml×4)

range of rotation

200 ~ 18000rpm / increase 10rpm

speed accuracy

± 20rpm

relative centrifugal force

23470×g / step increase 10×g

drive motor

Maintenance-free brushless variable frequency induction motor

Effective centrifugation time

1-99 hours/1-59 minutes/1-59 seconds; three modes are optional; accuracy ±1 second

drive control system

Infineon Vector Sine Wave Driver

Display method

5-inch IPS full viewing angle 16 million chroma true color LCD display/resolution 800×480dpi

control method

Physical button + knob

stored program

10 built-in stored programs / 5 panel shortcut program calls / equipped with NORMAL buttons

Door lock method

Electric control automatic suction double lock

Fastest acceleration time [sec]/up gear

18s/9 block

Fastest deceleration time [sec]/downshift

20s/10 gears, 0 gear free stop

Dimensions: length x width x height

500mm×390mm×330mm

Weight (without rotor)

35kg

Noise level at maximum speed (≈)

≤ 65dB(A)

degree of protection

IP20

Allowable ambient temperature /relative humidity

 +5 ~ 40 °C / 80%

Interference Suppression Standard

EN 61010-1, EN 61010-2-020, EN 61326-1, EN 61010-3-2/A2


Ordering Information

Part No.

Product number

M.01.013

M18G High Speed Centrifuge with Standard rotor 18G A-8

L.02.003

18G A-1 Angle rotor/rotor cover 1.5/2ml×24 holes

L.02.004

18G A-2 Angle rotor/rotor cover 1.5/2ml×36 holes

L.02.005

18G A-3 Angle rotor/rotor cover 0.5ml×36 holes

L.02.006

18G A-4 Angle rotor/rotor cover 5ml×12 holes

L.02.007

18G A-5 PCR Tube Rotor/Rotor Cover 0.2ml×8 Wells×4 Rows

L.02.008

18G A-6 Angle rotor/rotor cover 15ml×8 holes

L.02.009

18G A-7 Angle rotor/rotor cover 50ml×6 holes+2.2ml×6 holes

L.02.010

18G A-8 Angle rotor/rotor cover 100ml×4 holes 

L.02.011

18G A-9 Angle rotor/rotor cover 10ml×12 holes

L.02.001

18G A-10 Angle rotor 1.5/2.2ml×12 holes

L.06.003

18G-A-1.1 Conversion adapter 0.2ml×12pcs

L.06.004

18G-A-1.2 Conversion adapter 0.5ml×12pcs

 

Rotors

 

 




MAGAL Centrifuge

M400D Low Speed Centrifuge
M500R Low Speed Refrigerated Centrifuge
M15G High Speed Centifuge
M16RS High Speed Refrigerated Centrifuge
MSP-X 96 Well Plate Centrifuge
M8S-T Microplate Shaker
MV50 Muti Tube Vortex Mixer
M6 Vortex Mixer
MiniL 12G Large Capacity Mini Centrifuge