ReadyPlanet.com
dot
dot
Hot sale Products
dot
Filtration apparatus
dot
Representative Products
dot
dot
dot
bulletValve, Fitting and tubing
bulletSyringe and needle
bulletHPLC Columns
bulletDiluter and Dispenser
bulletPipettes and Pipetters
bulletSample Preparation instruments
bulletIsotope Ratio Mass Spec.
dot
Nitrogen Generator and Air Compressor
dot
Silent Oil free Air compressor for Atomic Absorption Spectrophotometer
dot
Other products
dot
bulletSPE Vacuum manifold
bulletVacuum Pump




Mini12G_Mini Centrifuge article

 

 


Features:

Mini12G_Mini Centrifuge

With the adoption of international advanced design philosophy and manufacturing technology, it has the advantages of sleek and pleasant appearance, compact and steady structure, high versatility and easy accessibility, as well as the functional performance of smooth starting and gradual braking; This mini centrifuge is well suited for micro pipe filtration and fast centrifugation, micro blood cell separation, microorganism sample handling, PCR experiment sub-area centrifugation, prevention of liquid from sticking to the surface of centrifugal tube and other phenomena, and is the first choice for handling small-lot centrifugal sample.

     
  • With the adoption of advanced and reliable PI high-frequency full-range broad-width power supply control solution,
  • it conforms to the power supply and power grid standards around the world.
  • Its voltage, current, revolving speed and effective centrifugation time can be controlled more accurately with the 16-bit MCU operation PWM speed governing, guaranteeing longer motor lifetime and lower electromagnetic noise in adverse service environment;
  • The step regulator of the centrifugal rotational speed is 500rpm,
  • The effective centrifugal time range is 1-99 minutes or 1-59 seconds;
  • Faster acceleration/deceleration rate enables it to finish the experiment as required in a shorter time;
  • High-strength main engine and rotor material are resistant to various chemical corrosions,
  • The rotor is alsoresistant to high-temperature sterilization;
  • Reliable and durable DC permanent magnet motor with broader speed control range of 500~12,000rpm andaccuracy of ±5%;
  • Unique rotor clip-on installation design enables experimenter to change the rotor more conveniently and morerapidly without any tools; Novel composite test tube rotor is compatible with various test tubes, and can satisfy basic experiment needswithout replacing rotor;
  • Shock-absorbent RSS material, more stable operation, rotating space of 360° arcs, without included angle, small wind resistance and temperature rise, ultra-silence and a complete machine noise of not more than 47dB;
  • With door cover protection as well as overspeed and imbalance detection system, it can conduct real-timemonitoring ding the centrifugation process to ensure safe operation of the instrument;
  • There will be sound signal reminder in case of operation finished, error and imbalance, then it will stop operating and the result code will be displayed on the LCD screen;

Technical Specification :

Product model

MiniL-12G

Input voltage

AC100-250V/50/60Hz

Power fuse tube

PPTC/ self restoring fuse / no need to change

 Power Consumption [W]

45W

 Operation mode 

16-bit MCU operation PWM speed governing

Display show type 

 LCD display 

Drive motor

24V DC permanent magnet motor

 Centrifugation Time

1-99min./1-59sec.

Speed [rmin.]

50012000rpm±5%

Speed increment

500rpm

 Max RCF [×g]

9660×g

Mis operation / fault alarm

Sound prompt + display code

Length × Width × Height  [mm]

194×229×120

Weight  [Kg]

2Kg

The noise of  Maximum speed (≈)

≤ 47dB(A)

 Maximum acceleration[sec]

≤12s

 Maximum deceleration[sec]

≤16s

 Protection grade

IP21

Allow ambient temperature / relative humidity

5-40/80%

Testing standard 

 EN 61010-1EN 61010-2-020EN 61326-1EN 61010-3-2/A2

 

Ordering Information :

Code No

Part No

Configuration information

 

MiniL-12G-16111

MiniL-12G

M12G Mini Centrifuge

 

MiniL-12G-16112

MiniL-12G-A-1

Composite angle type rotor 
1.5/2.2ml×12+PCR0.2ml×8 holes×4 strip                                   Standard

 
 

MiniL-12G-16113

MiniL-12G-A-2

Strip tube rotor 0.2ml×12 holes×4 strip                                      Standard

 

MiniL-12G-16114

MiniL-12G-A-3

Angle-rotor 5ml×4 holes/Cone-Bottom Tube                               Optional

 

MiniL-12G-16115

MiniL-12G-A-4

Capacity tubes×12 Φ1.5mm×40mm                                            Optional

 
 

MiniL-12G-16116

MiniL-12G-A-5

Angle-rotor 5ml×4 holes/Riser screw pipe                                   Optional

 

MiniL-12G-16117

MiniL-12G-AP-1

Adapter 0.5ml×12pcs /Standard MiniL-12G-A-1

 

MiniL-12G-16118

MiniL-12G-AP-2

Adapter 0.2ml×12pcs/Standard MiniL-12G-A-1

 

MiniL-12G-16119

MiniL-12G-AP-3

Adapter 1.8ml/1.1ml×4pcs/Standard MiniL-12G-A-5

 

MiniL-12G-161110

MiniL-12G-P-4

Capillary reading card/Standard MiniL-12G-A-4/ 1

 

MiniL-12G-161111

MiniL-12G-P-5

Capillary sealing wax board/Standard MiniL-12G-A-4/ 1

 

MiniL-12G-161112

MiniL-12G-P-6

40mm capillary/ One hundred per barrel
Red label/blue label                                                            Optional

 


Rotor :

 

Rotor Parameter :

Product model

Rotor

Capacity ml × tubes

Max Speed

Max  RCF

Tube type dimension

 
 
 

MiniL-12G-A-1

#1 Composite angle type rotor

1.5/2×12+PCR0.2×8×4

12000

9500

Cone-Bottom Tube

 
 
 

MiniL-12G-A-2

#2 PCR Angle-Rotor

PCR0.2×12×4

12000

5960

Cone-Bottom Tube

 
 

MiniL-12G-A-3

#3 Angle-Rotor

5×4

12000

9660

Cone-Bottom Tube

 
 

MiniL-12G-A-4

#4 Angle-Rotor 

Capacity tubes×12

12000

8371

Φ15mm×40mm

 
 

MiniL-12G-A-5

#5 Angle-Rotor

5/1.8/1.1×4

12000

3180

PP Riser screw pipe

 
  •  

 




MAGAL Products

M8_Vortex Mixer article
M15G_High Speed Centrifuge article
M400D_Low Speed Centrifuge article
Model M500S_Low Speed Centrifuge article



Copyright © 2010 All Rights Reserved.

C.E. Instruments (Thailand) Co., Ltd.

68/876 Moo 8, Rattanathibet Rd, Bangkrasor,
Muang – nonthaburi, Nonthaburi 11000, Thailand
Tel : 0-29658971-3   Fax : 0-29658974

Email : sales@cethailand.com Web site : www.cethailand.com